1, Excellent resistance to water and sea water resistance.
2, Excellent acid and alkali resistance.
3, Oil resistance, solvent resistance, excellent chemical resistance.
4, Strong weather resistance, tough film and excellent adhesion.
Fluorocarbon resin and non-variable yellow polyisocyanate hardener, with light-resistant pigments and fillers refined from durability, chemical resistance, alkali resistance, weatherability two-color colored finish.
Hotels, building walls and boats, cars, bridges, storage tanks, oilfield equipment, factory facilities and other steel structures used strong weather resistance alkali, strong chemical resistance of colored finishes.
Gloss 10-90% (60 ° angle)
Color Each color
Drying time Baking (70 ℃) 1 hour, from the dry (25 ℃) 24 hours, since the dry 7 days after the determination of oil, solvent resistance.
Chemical resistance Resistance to 5% sulfuric acid, resistant to 5% hydrochloric acid, resistant to 5% sodium hydroxide, resistant to 5% ammonia,
Product resistance Solvent. The above chemicals were soaked for 7 days, the film does not blister, do not fall off.
Salt spray 2000 hours, the film does not blister, do not fall off
Adhesion First level flexibility 1 mm Hardness ≥2H Impact resistance 50 kg.㎝
Mixing ratio Main agent Paint: Hardener = 5: 1 (weight ratio)
Thinner Fluorocarbon Topcoat Diluent
Applicable primer PY series at room temperature from dry primer, in the paint; external walls putty, closed primer, colored primer.
Storage stability Under normal circumstances for one year.
Painting method Brush, air spray, airless spray.
1, The main agent paint and hardening agent to join, then add the diluent to spray, brush the appropriate viscosity, wait 20 minutes after aging can be used.
2, The surface of the coating of water, grease, dust and other dirt should be removed clean.
3, The main agent with hardening agent after the available time 8 hours (25 ℃).
4, Hardener because it is easy to react with the water in the air bubble and gelation, the lid must be tightened to prevent contact with moisture in the air.
5, Do laminated coating, you must wait for the underlying film is completely dry, before the construction.
The actual coating amount of the paint is changed according to the size of the painted material, the working environment. The general loss factor is 1.4 times of the theoretical brush, and the coating is 1.7 times the theoretical coating amount.