1, Excellent resistance to water and sea water resistance.
2, Excellent acid and alkali resistance.
3, Oil resistance, solvent resistance, excellent chemical resistance.
4, The film tough and strong adhesion, and primer, top coat layer between the exce
Fluorocarbon resin and non-variable yellow polyisocyanate hardener, together with the rust-resistant pigments and fillers made of durable, chemical resistance, rust, alkali-resistant two-type mid paint.
Hotels, building walls and boats, cars, bridges, storage tanks, oilfield equipment, factory facilities and other steel structures used in the anti-rust, anti-corrosion in the primer.
Color Gray, yellow, other colors
Drying time Baking (70 ℃) 1 hour, from the dry (25 ℃) 24 hours, since the dry 7 days after the determination of oil, solvent resistance.
Resistant Chemical resistance, resistant to 5% sulfuric acid, resistant to 5% hydrochloric acid, resistant to 5% sodium hydroxide, resistant to 5% ammonia,
Product Resistance solvent. The above chemicals soak for 7 days, the film does not blister, do not leave.
Salt spray 2000 hours, the film does not blister, do not fall off
Adhesion First level flexibility 1 mm Hardness ≥H, impact resistance 50 kg.㎝
Mixing ratio Main agent Paint: Hardener = 5: 1 (weight ratio)
Thinner Fluorocarbon Primer Diluent.
Applicable primer PY series at room temperature from dry primer exterior putty, closed primer.
Applicable topcoat PY series at room temperature from dry finish.
Storage stability Under normal circumstances for one year.
Painting method Brush, air spray, airless spray.
1, The main agent paint and hardening agent to join, then add the diluent to spray, brush the appropriate viscosity, wait 20 minutes after aging can be used.
2, The surface of the coating of water, grease, dust and other dirt should be removed clean.
3, The main agent with hardening agent after the available time 8 hours (25 ℃).
4, Hardener because it is easy to react with the water in the air bubble and gelation, the lid must be tightened to prevent contact with moisture in the air.
5, Do laminated coating, you must wait for the underlying film is completely dry, before the construction.
The actual coating amount of the paint is changed according to the size of the painted material, the working environment. The general loss factor is 1.4 times of the theoretical brush, and the coating is 1.7 times the theoretical coating amount.