1, The film is tough and full of flexibility and adhesion.
2, Oil and solvent resistance and excellent resistance to chemicals.
3, Excellent wear resistance, water and sea water resistance is excellent.
4, Can fill the iron, steel, casting rough surfac
By the epoxy resin, amine hardener with rust-resistant pigments and fillers made of refined durability, rust-proof two liquid primer.
Vehicles, engineering machinery, bridges, steel frames, storage tanks, oil field equipment, factory facilities and other steel structures attached to the high rust, anti-corrosion primer.
Color Iron red, iron yellow, iron black, gray blue. Adhesion: Level 1
Glossy light or no light viscosity: 6 # cup ≥ 75s
Fineness below 40μm Flexibility: 2mm
Drying time Refers to touch: 1h dry: 12h hard dry: 24h
Water resistance 240h (no blistering, no rust, no shedding).
Oil resistance 48h (no significant change in appearance).
Acid resistance 0.05mol / L H2SO4, 7h (no blistering, no wrinkles, allowing slight discoloration).
Alkali resistance 0.1mol / L NaOH, 7h (no blistering, no wrinkles, allowing slight discoloration).
Resistant oil 6h (impregnated)
Salt spray resistance 600h unscaled plate through a level, 240h cut line side of 2mm, through a
Pencil hardness ≥ HB impact strength: 50kg.cm
Mixing ratio Main agent Paint: Curing agent = 5: 1 (weight ratio)
Diluent Epoxy diluent
Applicable topcoat All of our paint, finish.
Storage stability Under normal circumstances, at least one year.
Painting method No air spray, air spray, electrostatic spray.
1, Before use must be fully stirred evenly. If the paint is too thick, it can be diluted with diluent, but not more than the amount of the principle.
2, The surface of the coating of water, grease, rust, sludge, damaged or loose paint and corrosive salts, etc., attached to the dirt must be cleaned to ensure that the paint protection.
3, The surface of the wet condensation with dew or rainy days, should avoid construction.
4, Do laminated coating, you must wait for the underlying film is completely dry before construction.
The actual coating amount of the paint will change according to the size of the painted material, the working environment, the general loss factor: the hand brush for the theoretical coating amount of 1.4 times; spray for the theoretical coating of 1.7 times the calculation.