1, Dry quickly.
2, Strong water and anti-rust.
3, With good adhesion and abrasive.
From the special synthetic resin and nitrocellulose and plasticizers with high-grade anti-rust paint refined from the primer.
Vehicles, engineering machinery, agricultural machinery, steel structure of the anti-rust primer.
Color Gray, light yellow, other designated colors
Hiding Power above 9m2 / L
Viscosity Coated 6 # cup 100 ± 5s
Adhesion level 1 level
Dry time Refers to touch: 10 min less than dry dry: within 50min hard dry: 24h
Film thickness Wet film: 70μm dry film: 40μm
Theoretical Coating amount 11m2 / kg
Painting interval At least 1/2 hours
Solid content 55% or more
Diluent Nitro primer thinner
Thinner content 40-50% (without cleaning tool)
Applicable primer PY series nitro primer
Applicable topcoat PY series nitro finish.
Storage stability Under normal circumstances, at least one year.
Painting method Air spray, airless spray.
1, Before use must be fully stirred evenly. If the paint is too thick, it can be diluted with diluent, but not more than the amount of the principle.
2, The paint on both sides of the water, grease, rust, damage or release paint film and corrosive salts, etc., attached dirt must be cleaned to ensure that the paint protection.
3, The surface of the wet condensation of dew or in rainy days, and the temperature is too high (40 ℃ above) or too low (0 ℃ below), should avoid construction.
4, Do laminated coating, you must wait for the underlying film is completely dry before construction. Cover tightly in contact with moisture in the air.
The actual coating amount of the paint is changed according to the size of the painted material, the working environment. The general loss factor is 1.4 times of the theoretical brush, and the coating is 1.7 times the theoretical coating amount.