1, Dry quickly, strong adhesion.
2, Anti-rust performance is very good.
3, Resistant to sea water and oil resistance is better.
4, Easy construction.
5, Low prices.
From the alkyd resin, special resin and rust-resistant paint composition of the anti-rust from the dry primer.
External exposure to mild environment of steel structures and internal parts of the rust-proof primer.
Color Iron red, iron yellow, red Dan. Fineness ≤ 40um
Flash point 30 ℃ (25 ℃) Flexibility ≤ 4mm
Salt water resistance ≥ 96h
Specific gravity 1.25kg / L or more
Viscosity coated 6 # cup ≥ 75s
Drying time Refers to touch: 4h or less dry: 24h hardening: 48h or less
Painting interval At least 24h for up to 3 months
Film thickness Wet film: 70μm dry film: 40μm
Curing content More than 60%
Theoretical coating Amount 12m2 / L 10m2 / kg
Diluent Alkyd diluent
Diluent dosage 15-20%
Applicable topcoat PY-636 ~ 638 topcoat
Storage stability Under normal circumstances, at least one year.
Painting method Brush, roller, air spray, airless spray.
1, Before use must be fully stirred evenly. If the paint is too thick, it can be diluted with diluent, but not more than the amount of the principle.
2, The surface of the coating of water, grease, rust, sludge, damaged or loose paint and corrosive salts, etc., attached to the dirt must be cleaned to ensure that the paint protection.
3, The surface of the wet condensation of dew or in rainy days, and the temperature is too high (40 ℃ above) or too low (10 ℃ below), should avoid construction.
4, Do laminated coating, you must wait for the underlying film is completely dry before construction.
The actual coating amount of the paint will change according to the size of the painted material, the working environment, the general loss factor: the hand brush for the theoretical coating amount of 1.4 times; spray for the theoretical coating of 1.7 times the calculation.