1, VOC emissions ≤ 100g / L
2, at room temperature from the dry low hardness, low temperature baking water-based paint.
3, high gloss, smooth surface appearance, with superior adhesion and hardness and wear resistance.
4, excellent weather resistance,
By the import of water-based acrylic resin and water-based non-yellow polyisocyanate hardener, imported light-resistant paint refined from the two-type room temperature drying and baking dual-use colored finish.
Vehicles, containers, construction machinery, agricultural machinery, indoor and outdoor steel, iron metal wear-resistant water-based finish.
Color each color
Gloss more than 92%
Hiding power of 12 ㎡ / kg or more
Fineness below 20μm
Hardness greater than or equal to 2h
Specific gravity of 1.9kg / L or more
Impact strength: 50kg.cm
Baking time 70 ℃ 40 minutes 80 ℃ 30 minutes
Water-resistant immersed in distilled water for 240h, no blistering, no shedding
Resistant gasoline 4h, do not blister, do not fall off
Mixing ratio Main agent Paint: Curing agent: Pure water = 6: 1: 1.2-1.4 (weight ratio)
Available time 4 hours (after mixing 25 ℃)
Artificial anti-aging 1200h level (natural exposure, 2 years paint slightly lost light, fade)
Thinner pure water
Use Primer Waterborne Epoxy Primer
Storage stability under normal circumstances, at least one year.
Painting method Brush, air spray, air spray, electrostatic spray
1, before use must be fully stirred evenly. Water-based paint, such as ugly, can be discretionary pure water dilution, but not more than the amount of the principle.
2, coated surface water, grease, rust, sludge, damaged or loose paint and corrosive salts, etc., attached to the dirt must be cleaned to ensure that the water-based paint protection.
3, the surface of the wet condensation of dew or in rainy days, and the temperature is too high (40 ℃ above) or too low (0 ℃ when), should avoid construction.
4, do laminated coating, you must wait for the underlying film is completely dry before construction.
The actual coating amount of the paint will change according to the size of the painted material, the working environment, the general loss factor: the hand brush for the theoretical coating amount of 1.4 times; spray for the theoretical coating of 1.7 times the calculation.